Package: telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 208
Maintainer: Herbert Xu <herbert@debian.org>
Source: netkit-telnet
Version: 0.17-18
Replaces: netstd
Provides: telnet-client
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Description: The telnet client.
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.

Package: mysql-common
Status: purge ok not-installed
Priority: optional
Section: misc

Package: devfsd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 150
Maintainer: Russell Coker <russell@coker.com.au>
Version: 1.3.25-1
Depends: libc6 (>= 2.2.4-4)
Conffiles:
 /etc/default/devfsd fdefad42569c82fe8e75414e42908f2d
 /etc/devfs/devices.d/devfsd 6ed19445b04bfc61988f3151f4e2bd01
 /etc/devfs/devices 2c815a7883d228c23f215153cb725154
 /etc/devfs/perms a64e0f453ed118bd95f6d35068923e78
 /etc/devfs/symlinks.d/devfsd d41d8cd98f00b204e9800998ecf8427e
 /etc/devfs/symlinks d41d8cd98f00b204e9800998ecf8427e
 /etc/devfs/devfsd.conf b7f4bea79ffd0174221bf6974dce8861
 /etc/devfs/compat_symlinks e76fa05d3b09ac641412b97ea2ad30ea
 /etc/modutils/1devfsd e6c1005d976644a5b9ffc43810cd9182
 /etc/init.d/devfsd ac0b3780efa2996be07633e42c9fa92c
Description: Daemon for the device filesystem
 This daemon sets up the /dev filesystem for use. It creates required
 symbolic links in /dev and also creates (if so configured, as is the
 default) symbolic links to the "old" names for devices.

Package: vim
Status: purge ok not-installed
Priority: optional
Section: editors

Package: mbr
Status: purge ok not-installed
Priority: required
Section: base

Package: libwrap0
Status: install ok installed
Priority: important
Section: base
Installed-Size: 112
Maintainer: Anthony Towns <ajt@debian.org>
Source: tcp-wrappers
Version: 7.6-9
Depends: libc6 (>= 2.2.4-4)
Recommends: tcpd
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: pciutils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 320
Maintainer: Remco van de Meent <remco@debian.org>
Version: 1:2.1.9-4
Depends: libc6 (>= 2.2.4-4)
Description: Linux PCI Utilities (for 2.[1234].x kernels)
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus. Requires kernel version 2.1.82 or newer
 (supporting the /proc/bus/pci interface).

Package: traceroute
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 104
Maintainer: Herbert Xu <herbert@debian.org>
Version: 1.4a12-9
Replaces: netstd
Depends: libc6 (>= 2.2.4-4)
Conflicts: suidmanager (<< 0.50)
Description: Traces the route taken by packets over a TCP/IP network.
 The traceroute utility displays the route used by IP packets on their way to a
 specified network (or Internet) host.  Traceroute displays the IP number and
 host name (if possible) of the machines along the route taken by the packets.
 Traceroute is used as a network debugging tool.  If you're having network
 connectivity problems, traceroute will show you where the trouble is coming
 from along the route.
 .
 Install traceroute if you need a tool for diagnosing network connectivity
 problems.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 134
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.2.20020112a-7
Replaces: ncurses-term
Provides: ncurses-runtime
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/a/ansi 6b60f35a7fb6122a53b1e74e56cba56e
 /etc/terminfo/d/dumb ca3b114f0727da81a9b957b553a9915d
 /etc/terminfo/l/linux cfe817dd56f0f1be664f50d3dae3c8e5
 /etc/terminfo/m/mach d982b12970acbb48d594ed799615f036
 /etc/terminfo/m/mach-color 1bb86008400135036fea5773a9c819a1
 /etc/terminfo/m/mach-bold 21465595967257ad4020192c005cb280
 /etc/terminfo/p/pcansi 8b97f1ea94e8d2942c8dcd2d943e1322
 /etc/terminfo/r/rxvt bced284b61d1dbc0a8277bd7935dd511
 /etc/terminfo/r/rxvt-basic 1eb7a931b067c96963846e2a4ef2d020
 /etc/terminfo/r/rxvt-m 1eb7a931b067c96963846e2a4ef2d020
 /etc/terminfo/s/sun c7ab8d7ab013eca15c6eb83a4c80a3d1
 /etc/terminfo/s/screen-w 14966393f245385b727125084991b804
 /etc/terminfo/s/screen 4c9fd3df3369a99817b037f444c27f76
 /etc/terminfo/s/screen-bce 5f317dabafff82251f2f7f209c02d00c
 /etc/terminfo/v/vt52 2cfdf4dcc4a93c378d9c6bc01cb8f3c3
 /etc/terminfo/v/vt100 d93624290a5975897b0478520c709e83
 /etc/terminfo/v/vt102 e6fdc8a4110be9e38b4f1bb50009e883
 /etc/terminfo/v/vt220 d84067478b4b1365bec5b152daaf9161
 /etc/terminfo/x/xterm-mono a3737ab319cb56ed68819bf9e226df76
 /etc/terminfo/x/xterm-debian 75f9cdbd0a979b88408f615f54457d11
 /etc/terminfo/x/xterm 79587c4ce6ec87c190101ed7b938ea28
 /etc/terminfo/x/xterm-color 49257df2dcb6a468244ad712838d8a33
 /etc/terminfo/x/xterm-vt220 230c0c066d91f3f4b64e77efae8aafdf
 /etc/terminfo/x/xterm-xfree86 1aae39ec91033b9480b1e65501f24e17
 /etc/terminfo/x/xterm-r5 5f43e60ed674cb6e39afb7bf682d5174
 /etc/terminfo/x/xterm-r6 a4e2767a53279b6a894d92ca4dd2489e
Description: Descriptions of common terminal types
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100,
 vt102, vt220, vt52, and xterm.

Package: procps
Status: install ok installed
Priority: required
Section: base
Installed-Size: 464
Maintainer: Craig Small <csmall@debian.org>
Version: 1:2.0.7-8.woody1
Replaces: watch, bsdutils (<< 2.9x-1)
Provides: watch
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Recommends: psmisc
Conflicts: watch, libproc-dev (<< 1:1.2.6-2), w-bassman (<< 1.0-3), procps-nonfree, pgrep (<< 3.3-5)
Conffiles:
 /etc/sysctl.conf c629d55f0a9e2ba8e4d711e6aee5eae4
 /etc/init.d/procps.sh 29fad613bd9c0972cb4a008ad772196a
Description: The /proc file system utilities.
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.

Package: exim
Status: purge ok not-installed
Priority: important
Section: mail

Package: ipchains
Status: purge ok not-installed
Priority: important
Section: base

Package: console-tools-libs
Status: purge ok not-installed
Priority: important
Section: libs

Package: mc
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 4892
Maintainer: Adam Byrtek <alpha@debian.org>
Version: 1:4.6.0-5
Replaces: mc-common, manpages-pl (<= 20030210)
Depends: libc6 (>= 2.2.4-4), libglib2.0-0 (>= 2.0.1), libgpmg1 (>= 1.19.6-1)
Suggests: perl, mime-support
Conflicts: mc-common, suidmanager (<< 0.52)
Conffiles:
 /etc/mc/mc.ext 14388b492b6a0170bcccbfa4dc0c8b8b
 /etc/mc/mc.menu 49fb8f6a8cc2927e1ebffc9e17b53f9f
 /etc/mc/mc.lib dea776bc6ae2130e3e40fed7c49ce467
Description: Midnight Commander - a powerful file manager
 GNU Midnight Commander is a text-mode full-screen file manager. It
 uses a two panel interface and a subshell for command execution. It
 includes an internal editor with syntax highlighting and an internal
 viewer with support for binary files. Also included is Virtual
 Filesystem (VFS), that allows files on remote systems (e.g. FTP
 servers) and files inside archives to be manipulated like real files.

Package: prism54-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: prism54-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 639
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: prism54-cvs-20040110
Version: 0.4-20040211
Depends: kernel-czf-2.4.24
Description: CZF Prism54 for CZF kernel 2.4.24
 This package contains the loadable kernel module prism54, driver of
 the Prism GT PCI based wireless cards. It is based on driver at 
 http://prism54.org. This driver has been compiled to be compatible 
 with the czf kernel version 2.4.24.

Package: libstdc++2.10-glibc2.2
Status: install ok installed
Priority: required
Section: base
Installed-Size: 360
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Source: gcc-2.95 (2.95.4.ds13-11woody1)
Version: 1:2.95.4-11woody1
Depends: libc6 (>= 2.2.4-4)
Description: The GNU stdc++ library
 NOTE: This is not a final release, but taken from the CVS gcc-2_95-branch
 (dated 2001-10-02).
 .
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.

Package: adduser
Status: install ok installed
Priority: important
Section: base
Installed-Size: 408
Maintainer: Roland Bauerschmidt <rb@debian.org>
Version: 3.47
Depends: perl-base (>= 5.6.0), passwd (>= 961025), debconf
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf bf73b4e76066381cd3caf80369ce1d0e
Description: Add and remove users and groups
 This package includes the adduser and deluser commands for creating
 and removing users.
 .
 o Adduser can create new users and groups and add existing users to
   existing groups.
 o Deluser can remove users and groups and remove users from a given
   group.
 .
 Adding users with adduser is much easier than adding them by hand.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, allow you to set an
 initial password and the GECOS field.
 .
 Deluser can optionally remove and backup the user's home directory
 and mail spool or all files on the system owned by him.
 .
 Optionally a custom script can be executed after each of the commands.

Package: lilo
Status: install ok installed
Priority: important
Section: base
Installed-Size: 340
Maintainer: Russell Coker <russell@coker.com.au>
Version: 1:22.2-3
Depends: libc6 (>= 2.2.4-4)
Suggests: lilo-doc
Conflicts: manpages (<< 1.29-3)
Description: LInux LOader - The Classic OS loader can load Linux and others
 This Package contains lilo (the installer) and boot-record-images to
 install Linux, OS/2, DOS and generic Boot Sectors of other OSes.
 .
 You can use Lilo to manage your Master Boot Record (with a simple text screen,
 text menu or colorful splash graphics) or call Lilo from other Boot-Loaders to
 jump-start the Linux kernel.

Package: setserial
Status: purge ok not-installed
Priority: important
Section: base

Package: gettext
Status: purge ok not-installed
Priority: optional
Section: devel

Package: logrotate-czf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 104
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Version: 3.6.5-9
Replaces: logrotate
Provides: logrotate
Depends: libc6 (>= 2.2.5-11.5), libpopt0 (>= 1.6.2-7), cron (>= 3.0pl1-53) | anacron, base-passwd (>= 2.0.3.4)
Recommends: mailx
Conffiles:
 /etc/logrotate.conf 8e62dc9afcc652ed719fc3b5a7ed143c
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job. This package is designed to be most compact
 for CZF Debian.

Package: textutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1668
Maintainer: Herbert Xu <herbert@debian.org>
Version: 2.0-12
Replaces: bsdmainutils (<= 4.5.2), ptx
Provides: ptx
Pre-Depends: libc6 (>= 2.2.4-4)
Conflicts: ptx
Description: The GNU text file processing utilities.
 The utilities: cat cksum comm csplit cut expand fmt fold head join md5sum
 nl od paste pr ptx sort split sum tac tail tr tsort unexpand uniq wc.

Package: mysql-server
Status: purge ok not-installed
Priority: optional
Section: misc

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 152
Maintainer: Mark Baker <mbaker@iee.org>
Source: pcre3
Version: 3.4-1.1
Depends: libc6 (>= 2.2.3-7)
Description: Philip Hazel's Perl Compatible Regular Expression library
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.

Package: iptables
Status: purge ok not-installed
Priority: standard
Section: net

Package: libssl0.9.6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1052
Maintainer: Christoph Martin <christoph.martin@uni-mainz.de>
Source: openssl
Version: 0.9.6c-2.woody.6
Replaces: libssl, libssl096
Provides: libssl096
Depends: libc6 (>= 2.2.4-4)
Conflicts: ssleay (<< 0.9.2b), libssl, openssl (<< 0.9.6-2), libssl096, libssl096-dev (<< 0.9.6-2)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: kernel-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: libssl0.9.7
Status: purge ok not-installed
Priority: standard
Section: libs

Package: kernel-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 2229
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: linux-2.4.24.tar.gz
Version: 0.2-2
Description: CZF kernel 2.4.24
 This package contains the CZF kernel version 2.4.24

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 168
Maintainer: Craig Small <csmall@debian.org>
Version: 20.2-2.1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Description: Utilities that use the proc filesystem
 This package contains three little utilities that use the proc FS:
 .
 `fuser' identifies processes using files (similar to Sun's or SGI's fuser).
 `killall' kills processes by name, e.g. killall -HUP named. `pstree' shows
 the currently running processes as a tree

Package: ppp
Status: purge ok not-installed
Priority: optional
Section: base

Package: file
Status: purge ok not-installed
Priority: standard
Section: utils

Package: wireless-tools-czf
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 175
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: wireless-tools-26
Version: 26-2
Description: CZF Wireless Tools for CZF Debian
 This package contains newest wireless tools, compiled for the CZF Debian
 distro.

Package: console-common
Status: purge ok not-installed
Priority: important
Section: utils

Package: po-debconf
Status: purge ok not-installed
Priority: optional
Section: devel

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 76
Maintainer: LaMont Jones <lamont@debian.org>
Source: util-linux (2.11n-7)
Version: 1:2.11n-7
Pre-Depends: libc6 (>= 2.2.4-4)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite.
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: logger, renice, replay, script, wall

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 244
Maintainer: Steve Greenland <stevegr@debian.org>
Version: 3.0pl1-72
Depends: libc6 (>= 2.2.3-7), libpam0g (>= 0.72-1), debianutils (>= 1.7)
Recommends: exim | smail | sendmail | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, lockfile-progs
Conflicts: suidmanager (<< 0.50)
Conffiles:
 /etc/checksecurity.conf f55d654342c26422b9e3ce172f0ced00
 /etc/crontab 47bff886e1395f5a797c1c08dd59ef47
 /etc/init.d/cron 4074780db72b9a227aad3fbd75980163
 /etc/cron.daily/standard 0679d4336bcc70e4ccd10a78742a3fea
 /etc/cron.monthly/standard 597fcd12507f76fb847cc0174ad98b63
 /etc/pam.d/cron 6bfff63aee99b33204fb8269d2b177f8
Description: management of regular background processing
 cron is a background process (`daemon') that runs programs at regular
 intervals (for example, every minute, day, week or month); which
 processes are run and at what times are specified in the `crontab'.
 .
 Users may also install crontabs so that processes are run on
 their behalf, though this feature can be disabled or restricted to
 particular users.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package is configured by default to do various standard
 system maintenance tasks, such as ensuring that logfiles do not
 grow endlessly and overflow the disk.
 .
 The lockfile-progs package is only a "Suggests" because of the poor
 way that dselect handles "Recomments", but I do strongly suggest that
 you install it; it prevents /etc/cron.daily/standard from running multiple
 times if something gets jammed.

Package: libfreetype6
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libpcap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 140
Maintainer: Torsten Landschoff <torsten@debian.org>
Source: libpcap
Version: 0.6.2-2
Depends: libc6 (>= 2.2.3-7)
Conflicts: tcpdump (<< 3.5)
Description: System interface for user-level packet capture.
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, we've created this system-independent API to ease in
 porting and to alleviate the need for several system-dependent packet
 capture modules in each application.
 .
 Further information is available at <URL: http://www.tcpdump.org/>

Package: dh-make
Status: purge ok not-installed
Priority: optional
Section: devel

Package: wget
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 1204
Maintainer: Noel Koethe <noel@debian.org>
Version: 1.8.1-6.1
Depends: libc6 (>= 2.2.4-4)
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc a59e69be610403a192142c40ece9b35d
 /etc/wgetrc a59e69be610403a192142c40ece9b35d
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the Web
 using http and ftp, the two most widely used Internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as ftp
 sites -- you can use wget to make mirrors of archives and
 home pages or to travel the Web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both http and ftp) that support it. Both http and ftp
 retrievals can be time stamped, so wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
 .
 http://www.gnu.org/software/wget/

Package: rtl8180-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 262
Maintainer: Robert van der Meulen <rvdm@debian.org>
Version: 3.02-8
Pre-Depends: libc6 (>= 2.2.3-1)
Description: The GNU sed stream editor.
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: grub
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 492
Maintainer: Jason Thomas <jason@debian.org>
Version: 0.91-2
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Suggests: grub-doc
Description: GRand Unified Bootloader
 GRUB is a GPLed bootloader intended to unify bootloading across x86
 operating systems.  In addition to loading the Linux kernel,
 it implements the Multiboot standard, which allows for flexible loading
 of multiple boot images (needed for modular kernels such as the GNU
 Hurd).

Package: rtl8180-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 276
Maintainer: Zdenek "Deu" Janda  <support@czfree.net>
Source: rtl8180
Version: 0.1-1
Depends: wireless-tools-czf, kernel-czf-2.4.24
Description: RTL8180
 Driver for wireless network adapter based on RTL8180 chipset.
 Built for CZFree and kernel version 2.4.24

Package: liblockfile1
Status: purge ok not-installed
Priority: important
Section: libs

Package: libmysqlclient10
Status: purge ok not-installed
Priority: optional
Section: libs

Package: passwd
Status: install ok installed
Priority: required
Section: base
Installed-Size: 908
Maintainer: Karl Ramm <kcr@debian.org>
Source: shadow
Version: 20000902-12
Replaces: manpages (<= 1.15-2)
Depends: libc6 (>= 2.2.4-4), libpam0g (>= 0.72-1), login (>= 970502-1), libpam-modules (>= 0.72-5)
Conflicts: shadow-passwd, pam-apps, suidregister (<< 0.50)
Conffiles:
 /etc/shells 86fe8cc27358da46625cb25ebdad32a5
 /etc/pam.d/passwd 042f9aa4637868d6985db05cdf420c5f
 /etc/pam.d/chfn 0d839ad723f1d2908dc3b386b6b757c9
 /etc/pam.d/chsh f8a3e4675956b29afdc21a8ac705f6e9
Description: Change and administer password and group data.
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian.gz

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 61
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Version: 3.4.1
Replaces: base
Depends: libc6 (>= 2.2.4-4)
Description: Debian Base System Password/Group Files
 This package provides the master /etc/passwd and /etc/group files,
 containing Debian-allocated user and group IDs, plus the update-passwd
 utility to keep them up to date.

Package: libident
Status: purge ok not-installed
Priority: important
Section: libs

Package: libmysqlclient12
Status: deinstall ok config-files
Priority: optional
Section: libs
Installed-Size: 548
Maintainer: Christian Hammers <ch@debian.org>
Source: mysql-dfsg
Version: 4.0.13-1
Config-Version: 4.0.13-1
Replaces: mysql-client, mysql-gpl-client, mysql-devel
Depends: mysql-common, libc6 (>= 2.3.1-1), libssl0.9.7, zlib1g (>= 1:1.1.4)
Conflicts: libmysqlclient-dev (<< 4.0.13-1), libmysqlclient9-dev, libmysqlclient6-dev, mysql-dev, mysql, mysql-base
Description: mysql database client library
 MySQL is a fast, stable and true multi-user, multi-threaded SQL
 (Structured Query Language) database server. SQL is the most popular
 database query language in the world.
 .
 This package includes the client library.

Package: debconf-utils
Status: purge ok not-installed
Priority: optional
Section: devel

Package: apt
Status: install ok installed
Priority: important
Section: base
Installed-Size: 1984
Maintainer: APT Development Team <deity@lists.debian.org>
Version: 0.5.4
Replaces: libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7)
Provides: libapt-pkg-libc6.2-3-2-3.2
Depends: libc6 (>= 2.2.3-7), libstdc++2.10-glibc2.2
Suggests: dpkg-dev
Description: Advanced front-end for dpkg
 This is Debian's next generation front-end for the dpkg package manager.
 It provides the apt-get utility and APT dselect method that provides a
 simpler, safer way to install and upgrade packages.
 .
 APT features complete installation ordering, multiple source capability
 and several other unique features, see the Users Guide in
 /usr/share/doc/apt/guide.text.gz

Package: iputils-ping
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 128
Maintainer: Noah Meyerhans <noahm@debian.org>
Source: iputils
Version: 3:20020124-3
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.2.4-4)
Conflicts: ping, suidmanager (<< 0.50)
Description: The ping utility from iputils
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.  Aside from that, it is essentially functionally identical
 to the netkit-ping package.

Package: base-config
Status: purge ok not-installed
Priority: optional
Section: base

Package: cpp-2.95
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 655
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.11n-7
Replaces: miscutils, setterm, getty, fdisk
Pre-Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), slang1 (>> 1.4.4-7.1)
Recommends: util-linux-locales
Suggests: kbd | console-tools
Conflicts: setterm, getty, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21)
Conffiles:
 /etc/init.d/hwclock.sh 577cae4f77f83cc3c89d8463abdbb692
 /etc/init.d/hwclockfirst.sh 284871397536b4c667244f34d7fc267d
Description: Miscellaneous system utilities.
 A mixed bag of system utilities: arch blockdev chkdupexe cfdisk cytune
 dmesg fdisk fsck.minix getty getopt hwclock ipcrm ipcs mcookie mkfs
 mkfs.minix mkswap more namei pivot_root raw rdev setterm setsid tunelp
 whereis.

Package: libdb4.0
Status: purge ok not-installed
Priority: standard
Section: libs

Package: manpages
Status: purge ok not-installed
Priority: important
Section: doc

Package: ifupdown
Status: install ok installed
Priority: important
Section: base
Installed-Size: 68
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.6.4-4
Replaces: netbase (<< 4.00)
Depends: net-tools, libc6 (>= 2.2.3-1)
Suggests: iproute
Conffiles:
 /etc/init.d/ifupdown e144b85042ffebca1e3836ca194a5dc7
Description: High level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces, based on
 the file /etc/network/interfaces.

Package: pppoe
Status: purge ok not-installed
Priority: optional
Section: net

Package: zlib1g
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 88
Maintainer: Mark Brown <broonie@debian.org>
Source: zlib
Version: 1:1.1.4-1.0woody0
Provides: libz1
Depends: libc6 (>= 2.2.4-4)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 608
Maintainer: Bernd Eckenfels <ecki@debian.org>
Version: 1.60-4
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.2.4-4)
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach) and
 advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".

Package: libsasl7
Status: purge ok not-installed
Priority: important
Section: libs

Package: quagga-czf
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 7689
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Version: 0.96.4-20040212
Replaces: zebra
Provides: zebra
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), libreadline4 (>= 4.2a-4)
Conflicts: zebra
Description: CZF GNU Quagga for CZF Debian
 GNU Zebra is free software (distributed under the GNU Generic Public
 License) which manages TCP/IP based routing protocols. It supports
 BGP 4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, and RIPng as well as the
 IPv6 versions of these.
 .
 Zebra uses threading if the kernel supports it, but can also run on
 kernels that do not support threading.
 .
 Zebra is more than a routed replacement, it can be used as a Route
 Server and a Route Reflector.
 .
 Zebra is unique in design in that it has a process for each protocol.

Package: libpam-modules
Status: install ok installed
Priority: required
Section: base
Installed-Size: 354
Maintainer: Sam Hartman <hartmans@debian.org>
Source: pam
Version: 0.72-35
Replaces: libpam0g-util
Provides: libpam-motd, libpam-mkhomedir
Depends: libc6 (>= 2.2.4-4), libcap1, libdb3 (>= 3.2.9-1), libpam0g (>= 0.72-1)
Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir, suidmanager (<< 0.50)
Conffiles:
 /etc/security/access.conf 38cb78c2d1cc6be651c082036b9750f2
 /etc/security/group.conf afc1d14cc14b2952db15161bcb6e5be2
 /etc/security/limits.conf a9f7a9bc1db8b300cff38294f577abbd
 /etc/security/pam_env.conf 6ba316b3232f26b8f896b8d1f365d842
 /etc/security/time.conf ff5d257d548fc7425bb3b1394c095294
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix_*.so module as well as some specialty modules.

Package: libc6
Status: install ok installed
Priority: required
Section: base
Installed-Size: 12760
Maintainer: Ben Collins <bcollins@debian.org>
Source: glibc
Version: 2.2.5-11.5
Replaces: ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks, libc6-bin, netkit-rpc, netbase (<< 4.0)
Provides: glibc-2.2.5-11.5
Suggests: locales, glibc-doc
Conflicts: strace (<< 4.0-0), libnss-db (<< 2.2-3), timezone, timezones, gconv-modules, libtricks, libc6-doc, libc5 (<< 5.4.33-7), libpthread0 (<< 0.7-10), libc6-bin, libwcsmbs, apt (<< 0.3.0), libglib1.2 (<< 1.2.1-2), libc6-i586, libc6-i686, libc6-v9, netkit-rpc
Conffiles:
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
Description: GNU C Library: Shared libraries and Timezone data
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 Timezone data is also included.

Package: pcmcia-cs
Status: install ok installed
Priority: extra
Section: base
Installed-Size: 996
Maintainer: Brian Mays <brian@debian.org>
Version: 3.1.33-6woody1
Depends: libc6 (>= 2.2.4-4), modutils, psmisc
Pre-Depends: debconf (>= 0.2.17)
Suggests: pcmcia-modules, wireless-tools, hotplug, xlibs (>> 4.1.0)
Conffiles:
 /etc/apm/event.d/pcmcia 6a341702ab0d293867215010f2b483d3
 /etc/init.d/pcmcia d4647db2de52015b0db9145357e48a50
 /etc/pcmcia/cis/3CCFEM556.dat 064309527ab5c6f73f17f99f6b07e471
 /etc/pcmcia/cis/3CXEM556.dat 51e99ef0d234ea1b455b0555336f7379
 /etc/pcmcia/cis/COMpad2.dat 66748ecad364a24ea2150fccb1adbca0
 /etc/pcmcia/cis/COMpad4.dat a1b4e46b220b7ecaec0287875f47e549
 /etc/pcmcia/cis/DP83903.dat fb612f42364fd06c46aa936386a79abb
 /etc/pcmcia/cis/E-CARD.dat 3bd542b30f74fb6066b045436e0c70c6
 /etc/pcmcia/cis/LA-PCM.dat bee381e5d148bd073184a5cadfb6c314
 /etc/pcmcia/cis/MT5634ZLX.dat 15bc79fe185e6cc00c888ab6e54a0640
 /etc/pcmcia/cis/NE2K.dat f6092c8b414a94b96e310654cc5cad04
 /etc/pcmcia/cis/PCMLM28.dat bc1d913acfd5b8b70a6694bbd48b5795
 /etc/pcmcia/cis/PE-200.dat b779b33a4a692557517a3e6edf343fb2
 /etc/pcmcia/cis/PE520.dat fb7b7e2d7664771f0c4a1a39cc2efabf
 /etc/pcmcia/cis/RS-COM-2P.dat c9dd2f55d05d86f88cdf52f3e1363da2
 /etc/pcmcia/cis/tamarack.dat 90e5c6c2d26d81921e0f8d8c38c355f2
 /etc/pcmcia/config.opts b9e304c7efb46c83ec88bfb93f5c4bee
 /etc/pcmcia/config 53c6500fdc9a15c19ebb9ebde2d5ae39
 /etc/pcmcia/ftl.opts c6e0cd4d69e56836a6ff071bba8df4c3
 /etc/pcmcia/ftl 8ce8d054e43be0ffd4ec18d0135d9d0e
 /etc/pcmcia/ide.opts 98f615befe89350382037398ef6cd226
 /etc/pcmcia/ide e12b71562b39cfc5eb52c24e4d81c363
 /etc/pcmcia/ieee1394.opts 2bcfa5b4650abd23d1ddb94b49b8f1f5
 /etc/pcmcia/ieee1394 f30fb7cf0ade37ca692261aa8099460e
 /etc/pcmcia/memory.opts bd8486017c46fef68ac2ecf597c8e31b
 /etc/pcmcia/memory 92e807d523924347b0e21ef3759b4468
 /etc/pcmcia/network.opts ef4939dbadce60f1e8f8757a3612dd88
 /etc/pcmcia/network 6dd85ae8f6f566daed3ca169cfba8f07
 /etc/pcmcia/parport.opts d7a128b7352b136d60935fca3638a4f6
 /etc/pcmcia/parport e5bdea07209ab13be834d71324d93653
 /etc/pcmcia/scsi.opts 6c45330bd15b2db612d1d12d5682face
 /etc/pcmcia/scsi d8ae3f54036a35bef6febc483ed096fd
 /etc/pcmcia/serial.opts 29563e96e7629967e7c84689fd2ac01f
 /etc/pcmcia/serial 18860c2e19d4e06eabbcd3fddf2f945d
 /etc/pcmcia/wireless.opts a29a9a1843f6f1e7268d948a41578ca6
 /etc/pcmcia/wireless 6e3ef915d5238faf0eea5cb511261631
 /etc/pcmcia/shared 756cad3f2f9e655177fb874eeb2598f9
 /etc/pcmcia/config-2.4 bd82429d67551ec03bf74a9bfe4adb10
Description: PCMCIA Card Services for Linux.
 PCMCIA cards are commonly used in laptops to provide expanded
 capabilities, such as modems, increased memory, etc.  Some desktop PCs
 can accept PCMCIA cards as well, although this is rare.
 .
 Card Services for Linux is a complete PCMCIA support package.  It
 includes a set of client drivers for specific cards, and a card
 manager daemon that can respond to card insertion and removal events,
 loading and unloading drivers on demand.  It supports ``hot swapping''
 of PCMCIA cards, so cards can be inserted and ejected at any time.
 .
 The actual kernel modules required for this package are contained in
 the pcmcia-modules-<kernel version> package, where <kernel version> is
 the version of the kernel for which the modules have been compiled.
 .
 The wireless-tools package is required by wireless network adapters.
 The hotplug package is required by 2.4 (and later) series kernels to
 use PCI (Cardbus) devices.

Package: cpp-3.3
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: makedev
Status: purge ok not-installed
Priority: required
Section: base

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 401
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.2.20020112a-7
Provides: tput
Pre-Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Conflicts: ncurses, tput
Description: Terminal-related programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.

Package: netkit-ping
Status: purge ok not-installed
Priority: important
Section: net

Package: iproute2-czf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 768
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Version: 0.2-20040101
Replaces: iproute
Provides: iproute
Depends: libc6 (>= 2.2.4-4)
Conflicts: iproute
Description: Professional tools to control the networking in Linux kernels
 This is `iproute', the professional set of tools to control the
 networking behavior in kernels 2.2.x and later.
 .
 At least, the options CONFIG_NETLINK and CONFIG_RTNETLINK must
 be compiled in the running kernel
 .
 This package is also known as iproute2 upstream and in some
 documentation.

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1208
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 1.13.25-2
Replaces: cpio
Pre-Depends: libc6 (>= 2.2.4-4)
Suggests: bzip2
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU tar
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like pkzip in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libncurses5-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: lynx
Status: purge ok not-installed
Priority: standard
Section: web

Package: gcc-2.95
Status: purge ok not-installed
Priority: standard
Section: devel

Package: libsensors1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 144
Maintainer: David Z Maze <dmaze@debian.org>
Source: lm-sensors
Version: 2.6.3-5
Replaces: lm-sensors (= 2.3.2-1)
Depends: libc6 (>= 2.2.4-4)
Recommends: lm-sensors
Conflicts: lm-sensors (= 2.3.2-1), libsensors0
Description: Library to read temperature/voltage/fan sensors
 Lm-sensors is a hardware health monitoring package for Linux. It allows you
 to access information from temperature, voltage, and fan speed sensors. It
 works with most newer systems.
 .
 This package contains a shared library for querying lm-sensors.

Package: libglib1.2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: make
Status: purge ok not-installed
Priority: standard
Section: devel

Package: modconf
Status: purge ok not-installed
Priority: optional
Section: base

Package: pppconfig
Status: purge ok not-installed
Priority: optional
Section: base

Package: qosbase
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 82
Maintainer: Dzus <dzus@post.cz>, Danny <danny@danysek.cz>
Version: 2.1.3-2
Depends: iproute, debianutils, grep, sed
Conffiles:
 /etc/network/ip_adresy acce680414c532acf1df5ac770e567a1
 /etc/network/iface_conf 862d01fdde16ed2455c4997cb6f724bb
Description: CZFree.Net QoS-base_RFC scripts
 This package contains CZFree.Net QoS_base RFC scripts.
 See http://connected.czf/forum/showthread.php?threadid=9 for details,
 and post bugreports in that forum :)

Package: arptables-czf
Status: install ok unpacked
Priority: standard
Section: net
Installed-Size: 66
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Version: 0.0.3-2
Description: ARP tables administration tools for CZF 2.4.24 kernels

Package: nmap
Status: install ok installed
Priority: extra
Section: net
Installed-Size: 731
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.54.31.BETA-1
Depends: libc6 (>= 2.2.4-4)
Description: The Network Mapper
 nmap is a utility for port scanning large networks, although it works fine
 for single hosts.  The guiding philosophy for the creation of nmap was
 TMTOWTDI (There's More Than One Way To Do It).  This is the Perl slogan, but
 it is equally applicable to scanners.  Sometimes you need speed, other times
 you may need stealth.  In some cases, bypassing firewalls may be required.
 Not to mention the fact that you may want to scan different protocols (UDP,
 TCP, ICMP, etc.).  You just can't do all this with one scanning mode.  And
 you don't want to have 10 different scanners around, all with different
 interfaces.  Thus I incorporated virtually every scanning technique I know
 into nmap.  Specifically, nmap supports:
 .
        Vanilla TCP connect() scanning,
        TCP SYN (half open) scanning,
        TCP FIN (stealth) scanning,
        TCP ftp proxy (bounce attack) scanning
        SYN/FIN scanning using IP fragments (bypasses packet filters),
        UDP recvfrom() scanning,
        UDP raw ICMP port unreachable scanning,
        ICMP scanning (ping-sweep), and
        Reverse-ident scanning.
 .
 nmap also supports a number of performance and reliability features such as
 dynamic delay time calculations, packet timeout and retransmission, parallel
 port scanning, detection of down hosts via parallel pings, and flexible
 target and port specification.

Package: gettext-base
Status: purge ok not-installed
Priority: standard
Section: base

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 200
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 1.3.2-3woody1
Depends: debianutils (>= 1.6)
Pre-Depends: libc6 (>= 2.2.4-4)
Description: The GNU compression utility.
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: pcmcia-wireless-modules-2.4.23-czf
Status: purge ok not-installed
Priority: extra
Section: admin

Package: perl
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: klogd
Status: install ok installed
Priority: important
Section: base
Installed-Size: 128
Maintainer: Martin Schulze <joey@debian.org>
Source: sysklogd
Version: 1.4.1-10
Replaces: sysklogd
Provides: linux-kernel-log-daemon
Depends: libc6 (>= 2.2.4-4), sysklogd | system-log-daemon
Conflicts: sysklogd (<= 1.3-33)
Conffiles:
 /etc/init.d/klogd 6dad231b28b8d737c8e4ce82f5f2bbd5
Description: Kernel Logging Daemon
 The klogd daemon listens to kernel message sources and is responsible
 for prioritizing and processing operating system messages.  The klogd
 daemon can run as a client of syslogd or optionally as a standalone
 program.  Klogd can now be used to decode EIP addresses if it can
 determine a System.map file.

Package: madwifi-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: madwifi-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 373
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: madwifi-cvs-20041017
Version: 0.2-20041017
Depends: kernel-czf-2.4.24
Description: CZF Atheros a/b/g/h drivers for CZF kernel 2.4.24
 This package contains the loadable kernel module madwifi, driver of
 the Atheros PCI/MiniPCI based wireless cards. It is based on driver at 
 http://madwifi.sourceforge.net. This driver has been compiled to be
 compatible with the czf kernel version 2.4.24.

Package: syslinux
Status: purge ok not-installed
Priority: optional
Section: utils

Package: libdbd-mysql-perl
Status: purge ok not-installed
Priority: optional
Section: perl

Package: mtr-tiny
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 92
Maintainer: Robert Woodcock <rcw@debian.org>
Source: mtr
Version: 0.48-1
Replaces: mtr
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Conflicts: suidmanager (<< 0.50), mtr
Description: Full screen ncurses traceroute tool
 mtr combines the functionality of the 'traceroute' and 'ping' programs
 in a single network diagnostic tool.
 .
 As mtr starts, it investigates the network connection between the host
 mtr runs on and a user-specified destination host.  After it
 determines the address of each network hop between the machines,
 it sends a sequence ICMP ECHO requests to each one to determine the
 quality of the link to each machine.  As it does this, it prints
 running statistics about each machine.
 .
 mtr-tiny is compiled without support for X and conserves disk space.

Package: iptables-czf
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 695
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Version: 1.2.9-4
Replaces: iptables
Provides: iptables
Depends: libc6 (>= 2.2.4-4), debconf (>= 0.5)
Conflicts: iptables
Description: IP packet filter administration tools for CZF 2.4.24 kernels
 netfilter and iptables are the framework inside the  Linux 2.4.x kernel
 which enable packet filtering, network address translation (NAT) and
 other packet mangling.
 .
 netfilter is a set of hooks inside the linux 2.4.x kernel's network
 stack which allows kernel modules to register callback functions called
 every time a network packet traverses one of those hooks.
 .
 iptables is a generic table structure for the definition of rulesets.
 Each rule within an IP table consists out of a number of classifiers
 (matches) and one connected action (target).
 .
 netfilter, iptables and the connection tracking as well as the NAT
 subsystems together build the whole framework.
 .
 IMPORTANT NOTES: System security is a discipline that cannot be
 achieved by simply installing the iptables package -- the iptables
 package is NOT a firewall package. Also, misused rulesets can easily
 disallow you access to remote and local (yes, even localhost) network
 services.

Package: console-tools
Status: purge ok not-installed
Priority: important
Section: utils

Package: mc-common
Status: purge ok not-installed
Priority: optional
Section: utils

Package: iptraf
Status: purge ok not-installed
Priority: optional
Section: net

Package: libpam0g
Status: install ok installed
Priority: required
Section: base
Installed-Size: 105
Maintainer: Sam Hartman <hartmans@debian.org>
Source: pam
Version: 0.72-35
Replaces: libpam0g-util
Depends: libc6 (>= 2.2.4-4), libpam-runtime
Suggests: libpam-doc
Conflicts: libpam0 (<= 0.56-2), libpam
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 2840
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Version: 1.9.21
Replaces: dpkg-doc-ja
Pre-Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1), libstdc++2.10-glibc2.2 (>= 1:2.95.4-0.010810)
Conflicts: sysvinit (<< 2.80)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/dpkg/dselect.cfg 190f7cf843556324495ef12759b752e3
 /etc/dpkg/origins/debian 24926c0576edec3e316fd9f6072b8118
Description: Package maintenance system for Debian
 This package contains the programs which handle the installation and
 removal of packages on your system.
 .
 The primary interface for the dpkg suite is the `dselect' program;
 a more low-level and less user-friendly interface is available in
 the form of the `dpkg' command.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: hotplug
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 137
Maintainer: Fumitoshi UKAI <ukai@debian.or.jp>
Version: 0.0.20020114-7
Replaces: usbmgr
Depends: modutils (>= 2.4.2), debconf (>= 0.2.26)
Recommends: ifupdown, usbutils, pciutils, bsdutils
Suggests: hotplug-utils
Conflicts: usbmgr
Conffiles:
 /etc/hotplug/usb.distmap 1a55651bfb3f39d9c5fecd94088b41a9
 /etc/hotplug/usb.handmap b73066018a3e9dce3bc20bdb783a1691
 /etc/hotplug/hotplug.functions 0ca697cef14ae57029bfd37d1b08758e
 /etc/hotplug/ieee1394.agent 3246ca7990ae596e2c4f5eca23015bc7
 /etc/hotplug/net.agent e36a040d045a305a02a3faef84b5455f
 /etc/hotplug/pci.agent fbdb6a42c4801aaa7184700d7f121b7e
 /etc/hotplug/usb.agent cc6adaae5e09a40e68e153608cd6a790
 /etc/hotplug/usb.rc ef8f23150f367fe62ff3093f50e277c4
 /etc/logcheck/ignore.d/hotplug a3c30b54c9fb96a53cf33e9410a61d99
 /etc/init.d/hotplug fd400a8ecd8bb7ab73454450ff7d7c94
Description: Linux Hotplug Scripts
 This package contains the scripts necessary for hotplug Linux support,
 and lets you plug in new devices and use them immediately.
 Initially, it includes support for USB and PCI (Cardbus) devices,
 and can automatically configure network interfaces.

Package: cpio
Status: purge ok not-installed
Priority: important
Section: utils

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 158
Maintainer: Santiago Vila <sanvila@debian.org>
Version: 3.0.2
Replaces: base, miscutils, libreadline, libreadlineg2 (<< 2.1-16), bash (<< 2.03-3)
Provides: base
Depends: awk, base-passwd (>= 2.0.3.4)
Conffiles:
 /etc/debian_version cebd95add62a1fbd31fce88f17af1017
 /etc/host.conf a61b9f6548d337c1cc1e5a4de39f7b7f
 /etc/inputrc cbe06f78eaed38fd2058fb1a8c646f2b
 /etc/issue 07c680da92de9d8b1c625b0dde103f51
 /etc/issue.net 83dd6c45412c31e60ffa7cf0566c1e2c
 /etc/nsswitch.conf 109e33e2c91d1853b5bc56078a96aa18
 /etc/profile c437b4301366e5f88959c7b22ac922fd
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.

Package: nano
Status: purge ok not-installed
Priority: important
Section: editors

Package: hotplug-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 28
Maintainer: Fumitoshi UKAI <ukai@debian.or.jp>
Source: hotplug
Version: 0.0.20020114-7
Depends: libc6 (>= 2.2.4-4)
Description: Linux Hotplug utility programs
 This package contains some utilities for hotplug Linux support,
 fxload hotplug demon.
 This program is conveniently able to download firmware into FX and FX2
 ez-usb devices. It is intended to be invoked by hotplug scripts when
 the unprogrammed device appears on the bus.

Package: cvs-buildpackage
Status: purge ok not-installed
Priority: optional
Section: devel

Package: kernel-czf-wrap-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 2258
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: linux-2.4.24.tar.gz
Version: 0.1-1
Description: CZF kernel 2.4.24
 This package contains the CZF kernel version 2.4.24 for WRAP platform

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 352
Maintainer: Kevin Dalley <kevind@rahul.net>
Version: 4.1.7-2
Pre-Depends: libc6 (>= 2.2.3-1)
Conffiles:
 /etc/cron.daily/find 35426668d47dd02a46b5ee19159d1e0c
 /etc/updatedb.conf f68e926182440904808b78dd5c167c52
Description: utilities for finding files--find, xargs, and locate
 These utilities find files meeting specified criteria and perform
 various actions on the files which are found.

Package: qosigw
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 49
Maintainer: Dzus <dzus@post.cz>, Danny <danny@danysek.cz>
Version: 1.3.4-1
Depends: qosbase
Description: CZFree.Net QoS-iGW_RFC scripts
 This package contains CZFree.Net QoS_iGW RFC scripts.
 See http://connected.czf/forum/showthread.php?threadid=383 for details,
 and post bugreports in that forum :)

Package: pcmcia-modules-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 769
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: pcmcia-cs (3.2.6)
Version: 3.2.6-4
Provides: pcmcia-modules
Depends: pcmcia-cs, kernel-czf-2.4.24
Pre-Depends: debconf (>= 0.2.17)
Recommends: pcmcia-cs (>= 3.2.5), pcmcia-cs (<< 3.2.6)
Description: CZF PCMCIA Wireless Modules for Linux (czf kernel 2.4.24)
 This package contains the set of loadable kernel modules for the PCMCIA
 Card Services applications program interface.  They have been compiled
 to be compatible with the CZF kernel version 2.4.24.
 If you have compiled your own kernel, you will most likely need to
 also recompile the PCMCIA modules.  The pcmcia-source package has been
 provided to help Debian users recompile the PCMCIA modules to work with
 their kernels' configurations.  (It also is possible to rebuild these
 modules using the Debian source files for the pcmcia-cs package.)
 .
 The utilities in the pcmcia-cs package are required to use these
 modules.

Package: perl-modules
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: shellutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1840
Maintainer: Michael Stone <mstone@debian.org>
Version: 2.0.11-11
Replaces: bsdutils (<= 3.0-2), util-linux (<< 2.9e-0.1)
Pre-Depends: libc6 (>= 2.2.3-7), login | hurd
Conflicts: login (<< 19990827-1)
Description: The GNU shell programming utilities.
 The utilities: basename chroot date dirname echo env expr factor false groups
 hostid id logname nice nohup pathchk pinky printenv printf pwd seq sleep stty
 tee test true tty uname users who whoami yes.

Package: libsnmp-base
Status: purge ok not-installed
Priority: optional
Section: libs

Package: slang1
Status: install ok installed
Priority: required
Section: base
Installed-Size: 424
Maintainer: Jim Mintha <jmintha@debian.org>
Source: slang
Version: 1.4.4-7.2
Depends: libc6 (>= 2.2.4-4)
Description: The S-Lang programming library - runtime version.
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.

Package: binutils
Status: purge ok not-installed
Priority: standard
Section: devel

Package: gcc-3.3-base
Status: purge ok not-installed
Priority: important
Section: devel

Package: iptraf-czf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 176
Maintainer: Zdenek "Deu" Janda <support@czfeee.net>
Version: 2.7.0-2
Replaces: iptraf
Provides: iptraf
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Conflicts: iptraf
Description: Interactive Colorful IP LAN Monitor
 IPTraf is an ncurses-based IP LAN monitor that generates
 various network statistics including TCP info, UDP counts,
 ICMP and OSPF information, Ethernet load info, node stats,
 IP checksum errors, and others.
 .
 Note that since 2.0.0 IPTraf requires a kernel >= 2.2

Package: tasksel
Status: purge ok not-installed
Priority: optional
Section: base

Package: cpp
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: debhelper
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 706
Maintainer: Akira TAGOH <tagoh@debian.org>
Source: glib2.0
Version: 2.0.1-2
Depends: libc6 (>= 2.2.4-4)
Recommends: libglib2.0-data
Description: The GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.

Package: dpkg-dev
Status: purge ok not-installed
Priority: standard
Section: utils

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: base
Installed-Size: 66
Maintainer: Sam Hartman <hartmans@debian.org>
Source: pam
Version: 0.72-35
Replaces: libpam0g-util, libpam0g-dev
Conflicts: libpam0g-util, libpam0g (<< 0.66-0)
Conffiles:
 /etc/pam.conf c29f5bbea9887ff059b5973185c82212
 /etc/pam.d/other cffe10505deaa7e78bbcd1c3ac4c5ea7
Description: Runtime support for the PAM library
 Contains the base setup for libpam

Package: mailx
Status: purge ok not-installed
Priority: important
Section: mail

Package: xlibs
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libldap2
Status: purge ok not-installed
Priority: important
Section: libs

Package: bsdmainutils
Status: purge ok not-installed
Priority: important
Section: utils

Package: man-db
Status: purge ok not-installed
Priority: important
Section: doc

Package: libc6-dev
Status: purge ok not-installed
Priority: standard
Section: devel

Package: tcpdump
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 400
Maintainer: Torsten Landschoff <torsten@debian.org>
Version: 3.6.2-2.8
Depends: libc6 (>= 2.2.4-4), libpcap0 (<< 0.7.0), libpcap0 (>= 0.6.1-1)
Description: A powerful tool for network monitoring and data acquisition
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect "ping attacks"
 or to monitor network activities. More information is at
 <URL: http://www.tcpdump.org/>

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 421
Maintainer: Robert van der Meulen <rvdm@debian.org>
Version: 2.4.2-3
Provides: rgrep
Pre-Depends: libc6 (>= 2.2.4-4)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep.
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: whiptail
Status: purge ok not-installed
Priority: standard
Section: base

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 205
Maintainer: LaMont Jones <lamont@debian.org>
Source: util-linux
Version: 2.11n-7
Pre-Depends: libc6 (>= 2.2.4-4)
Description: Tools for mounting and manipulating filesystems.
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: zebra
Status: purge ok not-installed
Priority: extra
Section: net

Package: at
Status: purge ok not-installed
Priority: important
Section: admin

Package: pppoeconf
Status: purge ok not-installed
Priority: optional
Section: net

Package: ebtables
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 152
Maintainer: Jochen Friedrich <jochen@scram.de>
Version: 2.0.6-0.backports.org.1
Depends: libc6 (>= 2.2.4-4)
Conffiles:
 /etc/ethertypes 94bffde8f75a1b8f891fb780bfe15ca2
Description: Ethernet bridge frame table administration
 Ebtables is used to set up, maintain, and inspect the tables of
 Ethernet frame rules in the Linux kernel. It is analogous to iptables,
 but operates at the MAC layer rather than the IP layer.

Package: mtr
Status: purge ok not-installed
Priority: extra
Section: net

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 832
Maintainer: Yann Dirson <dirson@debian.org>
Version: 1.27-2
Provides: libcomerr2, libss2, libext2fs2, libe2p2, libuuid1
Pre-Depends: libc6 (>= 2.2.4-4)
Suggests: gpart, parted, e2fsck-static
Conflicts: e2fslibsg, dump (<< 0.4b4-4), quota (<< 1.55-8.1)
Description: The EXT2 file system utilities and libraries.
 EXT2 stands for "Extended Filesystem", version 2. It's the main
 filesystem type used for hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining EXT2
 filesystems, and the generic `fsck' wrapper.

Package: html2text
Status: purge ok not-installed
Priority: optional
Section: web

Package: modutils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 471
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Version: 2.4.15-1
Replaces: manpages (<= 1.15-3)
Depends: libc6 (>= 2.2.4-4), sysvinit (>= 2.71-2)
Suggests: ksymoops
Conffiles:
 /etc/cron.daily/modutils 10fc6b90de70ffa3594d6c47ec9be935
 /etc/init.d/modutils 5b2ca920e788785e78951efca596ecd4
 /etc/modutils/0keep 89c032bf9e755bf0b1666227d20df03e
 /etc/modutils/aliases ced739ecb2c43a20053a9f0eb308b2b0
 /etc/modutils/actions 263c2a73eab64f6797b43418cc658a51
 /etc/modutils/paths a2322d7e2f95317b2ddf3543eb4c74c0
 /etc/modutils/arch/alpha a06fe12e20ddc763c9570267b41b0e10
 /etc/modutils/arch/i386 f9e3eac60200d41dd5569eeabb4eddff
 /etc/modutils/arch/m68k.generic 2c847312df7201d7004943482a0d1b4a
 /etc/modutils/arch/m68k.amiga f07da2ebf00c6ed6649bae5501b84c4f
 /etc/modutils/arch/m68k.atari 2893201cc7f7556160fa9cd1fb5ba56a
 /etc/modutils/arch/m68k.mac b96b83b867551b23d221c4d67952d2f7
 /etc/modutils/arch/powerpc.apus bcfd7aa94c8e2453dd6a448c06f172f5
 /etc/modutils/arch/powerpc.generic 86faaa356a37e5a673c6c158ea80e2ba
 /etc/modutils/arch/powerpc.pmac d6c5d69f128424be7efbe568a49336ab
 /etc/modutils/arch/s390 aea3c8b93c7c437a57dadfe187dabcd3
Description: Linux module utilities.
 These utilities are intended to make a Linux modular kernel
 manageable for all users, administrators and distribution
 maintainers.

Package: ed
Status: purge ok not-installed
Priority: important
Section: editors

Package: xfree86-common
Status: purge ok not-installed
Priority: optional
Section: x11

Package: gcc-3.3
Status: purge ok not-installed
Priority: standard
Section: devel

Package: reiserfsprogs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 920
Maintainer: Ed Boraas <ed@debian.org>
Version: 3.x.1b-1
Depends: libc6 (>= 2.2.4-4)
Description: User-level tools for ReiserFS filesystems
 This package contains utilities to create, check, resize, and debug ReiserFS
 filesystems.
 .
 NOTE: Releases of Linux prior to 2.4.1 do not support ReiserFS on their own.
 Thus, these tools will only be useful with Linux 2.4.1 or later, or if your
 kernel has been built with the ReiserFS patch applied. This patch can be found
 in the appropriate kernel-patch-<version>-reiserfs packages.

Package: bridge-utils
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 65
Maintainer: Santiago Garcia Mantinan <manty@debian.org>
Version: 0.9.5-2
Depends: libc6 (>= 2.2.4-4), ifupdown (>= 0.6.0)
Conffiles:
 /etc/network/if-pre-up.d/bridge 745942a81724109b0acbb19106afde89
 /etc/network/if-post-down.d/bridge 4c1d2c2bf27a2cec9416b821d4291bcd
 /etc/network/if-up.d/bridge 9442aee53715a0f2f2f268c8e9c0e27b
Description: Utilities for configuring the Linux 2.4 bridge.
 This package contains utilities for configuring the Linux ethernet
 bridge. The Linux ethernet bridge can be used for connecting multiple
 ethernet devices together. The connecting is fully transparent: hosts
 connected to one ethernet device see hosts connected to the other
 ethernet devices directly.

Package: groff-base
Status: purge ok not-installed
Priority: important
Section: text

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 260
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Version: 2.84-2woody1
Replaces: last, bsdutils (<= 2.0-2), dpkg (<< 1.9.17)
Depends: dpkg (>= 1.4.0.21), mount (>= 2.7i-1), util-linux (>= 2.9t-2), e2fsprogs (>= 1.15-1)
Pre-Depends: libc6 (>= 2.2.4-4)
Conflicts: last, file-rc (<= 0.5.7), kbd (<< 0.95-2), mdutils (<< 0.35-9)
Conffiles:
 /etc/init.d/bootmisc.sh a46d3e5489623429fa1fecc3d4909803
 /etc/init.d/checkfs.sh 3b92668d7b4759ba71f2d7a29e6993fe
 /etc/init.d/checkroot.sh 63cab231a77e90fe4394d29486c98844
 /etc/init.d/halt ef5aeb862d9e08ae867613a2cd8eb09d
 /etc/init.d/hostname.sh d8d00942182f145fa79ee6e3f21701d9
 /etc/init.d/mountall.sh 07905e3fc0711a11d955330d7060be95
 /etc/init.d/mountnfs.sh 949afae88cef03db3e58e119f17095e3
 /etc/init.d/reboot aff6c76c29e8daa1f7c47479024d51b2
 /etc/init.d/rmnologin 21e4400746194a7c326d52d825800423
 /etc/init.d/sendsigs 32c8aa88d25b89bc282ab4619fc87f02
 /etc/init.d/single 5749c09a9206e6aaf61c768feac09b16
 /etc/init.d/umountfs 3703c88807362ab9fc8c768f7641b833
 /etc/init.d/umountnfs.sh 4fb18331da05c8e90c9b9e7cb3b74f3c
 /etc/init.d/urandom 10b4190e2f80479711d6817a868927c7
Description: System-V like init.
 Init is the first program to run after your system is booted, and
 continues to run as process number 1 until your system halts. Init's
 job is to start other programs that are essential to the operation of
 your system. All processes are descended from init. For more information,
 see the manual page init(8).

Package: libmagic1
Status: purge ok not-installed
Priority: standard
Section: libs

Package: libgcc1
Status: purge ok not-installed
Priority: standard
Section: libs

Package: gcc
Status: purge ok not-installed
Priority: standard
Section: devel

Package: ssh
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 1508
Maintainer: Matthew Vernon <matthew@debian.org>
Source: openssh
Version: 1:3.4p1-1.woody.3
Provides: rsh-client
Depends: libc6 (>= 2.2.4-4), libpam0g (>= 0.72-1), libssl0.9.6, libwrap0, zlib1g (>= 1:1.1.4), libpam-modules (>= 0.72-9), debconf, adduser
Suggests: ssh-askpass, xbase-clients, dpkg (>= 1.8.3.1), dnsutils
Conflicts: ssh-nonfree (<< 2), ssh-socks, ssh2, debconf (<< 0.2.17), debconf-tiny (<< 0.2.17), sftp, rsh-client (<< 0.16.1-1)
Conffiles:
 /etc/ssh/ssh_config 43aaf8cdb9b148e2dcc10469fba36e41
 /etc/ssh/moduli c67600310eb998d72dff1e98b0a9051e
 /etc/init.d/ssh 0ae140a8c879d5f2446d984ad7c071d5
 /etc/pam.d/ssh 7b36e8ca3b50960d7c222ed104328abf
Description: Secure rlogin/rsh/rcp replacement (OpenSSH)
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network.  X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide applications with a secure communication channel.
 .
 --------------------------------------------------------------------
 .
 In some countries, particularly Iraq, and Pakistan, it may be illegal
 to use any encryption at all without a special permit.

Package: tcpd
Status: purge ok not-installed
Priority: important
Section: base

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1476
Maintainer: Brendan O'Dea <bod@debian.org>
Source: perl
Version: 5.6.1-8.7
Replaces: perl-5.005-base (<< 6), perl-5.6-base (<< 6), perl (<< 5.6.1-1), perl-modules (<< 5.6.1-4)
Provides: perl5-base, perlapi-5.005, perlapi-5.6.0, perlapi-5.6.1, data-dumper
Pre-Depends: libc6 (>= 2.2.4-4)
Suggests: perl
Conflicts: perl-5.004-base (<< 6), perl-5.005-base (<< 6), perl-5.6-base (<< 6), data-dumper
Description: The Pathologically Eclectic Rubbish Lister.
 A scripting language with delusions of full language-hood, Perl is used
 in many system scripts and utilities.
 .
 This is a stripped down Perl with only essential libraries.  To make
 full use of Perl, you'll want to install the `perl', `perl-modules' and
 optionally `perl-doc' packages which supplement this one.

Package: fdutils
Status: purge ok not-installed
Priority: optional
Section: base

Package: hostap-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: wireless-tools
Status: purge ok not-installed
Priority: extra
Section: net

Package: hostap-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 1124
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: hostap-0.1.3-jb
Version: 0.8-0.0.3jb
Depends: kernel-czf-2.4.24
Description: CZF HostAP for CZF kernel 2.4.24
 This package contains the loadable kernel module hostap_pci, driver of
 the Prism 2.5 PCI based wireless cards. It is based on popular hostap
 driver at http://hostap.epitest.fi, patched for use in the CZFree.Net
 network by JBohac at http://jikos.cz/~jbohac/hostap. This driver has
 been compiled to be compatible with the czf kernel version 2.4.24.

Package: xfsprogs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1588
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.0.3-1
Depends: libc6 (>= 2.2.4-4)
Suggests: xfsdump, attr, dvhtool
Conflicts: xfsdump (<< 2.0.0)
Description: Utilities for managing the XFS filesystem
 A set of commands to use the XFS filesystem, including mkfs.xfs.
 .
 XFS is a high performance journaling filesystem which originated
 on the SGI IRIX platform.  It is completely multi-threaded, can
 support large files and large filesystems, extended attributes,
 variable block sizes, is extent based, and makes extensive use of
 Btrees (directories, extents, free space) to aid both performance
 and scalability.
 .
 Refer to the documentation at http://oss.sgi.com/projects/xfs/
 for complete details.  This implementation is on-disk compatible
 with the IRIX version of XFS.

Package: net-modules-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: net-modules-czf-2.4.24
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 119
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: kernel-czf-2.4.24
Version: 0.1-2
Depends: kernel-czf-2.4.24
Description: CZF Net Modules for Linux (czf kernel 2.4.24)
 This package contains the set of loadable kernel modules for the PCMCIA
 Card Services applications program interface.  They have been compiled
 to be compatible with the CZF kernel version 2.4.24.
 If you have compiled your own kernel, you will most likely need to
 also recompile the PCMCIA modules.  The pcmcia-source package has been
 provided to help Debian users recompile the PCMCIA modules to work with
 their kernels' configurations.  (It also is possible to rebuild these
 modules using the Debian source files for the pcmcia-cs package.)
 .
 The utilities in the pcmcia-cs package are required to use these
 modules.

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 84
Maintainer: Adam Heath <doogie@debian.org>
Version: 2.09
Pre-Depends: libc6 (>= 2.2.3-1)
Description: A utility to set/show the host name or domain name
 The hostname command can be used to either set or display
 the current host or domain name of the system. This name is
 used by many of the networking programs to identify the machine.
 The domain name is also used by NIS/YP.

Package: libstdc++5
Status: purge ok not-installed
Priority: important
Section: base

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 852
Maintainer: Joey Hess <joeyh@debian.org>
Version: 1.0.32
Replaces: debconf-tiny
Provides: debconf-tiny
Depends: fileutils (>= 4.0-5)
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1)
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, liblocale-gettext-perl, libterm-readline-gnu-perl, libgnome-perl, libnet-ldap-perl
Conflicts: debconf-utils (<< 0.9), debconf-tiny (<< 1.0), apt (<< 0.3.12.1), menu (<= 2.1.3-1), dialog (<< 0.9a-20000730-1), whiptail (<< 0.50.17-7), cdebconf (<< 0.10-5)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 61aa985ecce93b4e44723934041abdd2
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 288
Maintainer: Karl Ramm <kcr@debian.org>
Source: shadow
Version: 20000902-12
Replaces: shadow-login, shadow-passwd, shellutils (<< 2.0-2)
Depends: libpam-modules (>= 0.72-5)
Pre-Depends: libc6 (>= 2.2.4-4), libpam0g (>= 0.72-1)
Conflicts: shadow-login, pam-apps, secure-su, suidregister (<< 0.50)
Conffiles:
 /etc/login.defs 20ebd0800eb4a0b18d766443eec98c7f
 /etc/pam.d/login c7bf2687010eeeda6b4d1fa2ad0f3ad3
 /etc/pam.d/su 0bd0c9d699b72c402ca34f04fce76cd8
 /etc/securetty 2ca5eb590ade8b115b796336ba184851
Description: System login tools
 These tools are required to be able to login and use your system. The
 login program invokes you user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
 .
 Also supplies a logout daemon that can place limits on when, from where,
 and for how long certain users can login to the system.

Package: fileutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1928
Maintainer: Michael Stone <mstone@debian.org>
Version: 4.1-10
Replaces: color-ls, util-linux (<= 2.7.1-1)
Pre-Depends: libc6 (>= 2.2.4-4)
Conflicts: color-ls
Description: GNU file management utilities
 This package contains the essential system utilities to manipulate
 files on your system.  Included in this package are commands to
 change the permissions on files, list the files in a directory,
 create new directories, and list free disk space, among other things.
 .
 The specific utilities included are: chgrp chmod chown cp dd df dir
 dircolors du install ln ls mkdir mkfifo mknod mv rm rmdir shred touch
 vdir sync.

Package: libsnmp4.2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libnewt0
Status: purge ok not-installed
Priority: standard
Section: base

Package: libdb1-compat
Status: purge ok not-installed
Priority: required
Section: oldlibs

Package: lm-sensors-czf-2.4.23
Status: purge ok not-installed
Priority: extra
Section: admin

Package: cvs
Status: purge ok not-installed
Priority: optional
Section: devel

Package: logrotate
Status: purge ok not-installed
Priority: important
Section: admin

Package: console-data
Status: purge ok not-installed
Priority: important
Section: utils

Package: libdbi-perl
Status: purge ok not-installed
Priority: optional
Section: interpreters

Package: libncurses5
Status: install ok installed
Priority: required
Section: base
Installed-Size: 444
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.2.20020112a-7
Depends: libc6 (>= 2.2.4-4)
Description: Shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.

Package: apt-utils
Status: purge ok not-installed
Priority: optional
Section: admin

Package: libdb2
Status: purge ok not-installed
Priority: required
Section: base

Package: libreadline4-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libdb3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 728
Maintainer: Matthew Wilcox <willy@debian.org>
Source: db3
Version: 3.2.9-16
Depends: libc6 (>= 2.2.4-4)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v3 Database Libraries [runtime]
 This is the runtime package for programs that use the Berkeley v3
 database library.

Package: mawk
Status: install ok installed
Priority: required
Section: base
Installed-Size: 228
Maintainer: James Troup <james@nocrew.org>
Version: 1.3.3-8
Provides: awk
Pre-Depends: libc6 (>= 2.2.3-1)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the Posix 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: info
Status: purge ok not-installed
Priority: important
Section: doc

Package: netkit-inetd
Status: purge ok not-installed
Priority: important
Section: net

Package: pcmcia-modules-2.4.18-bf2.4
Status: purge ok not-installed

Package: ntp-simple
Status: purge ok not-installed
Priority: optional
Section: net

Package: netbase
Status: purge ok not-installed
Priority: important
Section: base

Package: mysql-client
Status: purge ok not-installed
Priority: optional
Section: misc

Package: ntp
Status: purge ok not-installed
Priority: optional
Section: net

Package: libreadline4
Status: install ok installed
Priority: required
Section: base
Installed-Size: 273
Maintainer: Matthias Klose <doko@debian.org>
Source: readline4
Version: 4.2a-5
Replaces: libreadline4-dev (<< 2.5a)
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Conflicts: libreadline4-dev (<< 2.5a)
Description: GNU readline and history libraries, run-time libraries.
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: nvi
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 584
Maintainer: Steve Greenland <stevegr@debian.org>
Version: 1.79-20
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20010310-1)
Conffiles:
 /etc/init.d/nviboot a4f8cdc68b7ed67ee215f1e3d2c98142
Description: 4.4BSD re-implementation of vi.
 Vi is the original screen based text editor for Unix systems.
 It is considered the standard text editor, and is available on
 almost all Unix systems.
 .
 Nvi is intended as a "bug-for-bug compatible" clone of the original
 BSD vi editor. As such, it doesn't have a lot of snazzy features as do
 some of the other vi clones such as elvis and vim. However, if all
 you want is vi, this is the one to get.

Package: libgpmg1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 104
Maintainer: Zephaniah E. Hull <warp@debian.org>
Source: gpm
Version: 1.19.6-12
Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Suggests: gpm
Conflicts: libgpm1 (<< 1.12-3)
Description: General Purpose Mouse Library [libc6]
 This package provides a library that handles mouse requests
 and delivers them to applications.

Package: patch
Status: purge ok not-installed
Priority: standard
Section: utils

Package: diff
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 206
Maintainer: Santiago Vila <sanvila@debian.org>
Version: 2.7-29
Pre-Depends: libc6 (>= 2.1.2)
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 872
Maintainer: Matthias Klose <doko@debian.org>
Version: 2.05a-11
Replaces: bash-doc (<= 2.05-1), bash-completion
Depends: base-files (>= 2.1.12)
Pre-Depends: libc6 (>= 2.2.4-4), libncurses5 (>= 5.2.20020112a-1)
Conflicts: bash-completion
Conffiles:
 /etc/bash.bashrc e218a2979b01db4e9c3ae19c94294a57
 /etc/bash_completion 5769c2f29cbbc0bde1cf2996ec6231ec
 /etc/skel/.bash_profile d8e9ecd0b80102c82966a045544bbf68
 /etc/skel/.bashrc e9d2739d6f3d7672222c07d901d46e21
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).

Package: libgtk1.2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: dhcp-client
Status: purge ok not-installed
Priority: optional
Section: net

Package: lm-sensors-czf
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 548
Maintainer: Zdenek "Deu" Janda <support@czfree.net>
Source: lm-sensors-2.8.3.tar.gz
Version: 2.8.3-2
Replaces: lm-sensors
Depends: kernel-czf-2.4.24
Conflicts: lm-sensors
Description: CZF lm-sensors for CZF kernel 2.4.24
 This package contains the binaries for lm-sensors,
 drivers of the hw monitoring hardware used in motherboards. This 
 driver has been compiled to be compatible with the czf kernel 
 version 2.4.24.

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 180
Maintainer: Guy Maor <maor@debian.org>
Version: 1.16.2woody1
Replaces: miscutils, cron (<= 3.0pl1-31), debian-utils, tetex-bin (<< 1.0.6-1.1)
Pre-Depends: libc6 (>= 2.2.4-4)
Conflicts: debian-utils
Description: Miscellaneous utilities specific to Debian.
 Debianutils includes installkernel mkboot mktemp readlink run-parts savelog
 sensible-editor sensible-pager tempfile which.

Package: iproute
Status: purge ok not-installed
Priority: extra
Section: net

Package: libcap1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 64
Maintainer: Michael Vogt <mvo@debian.org>
Source: libcap
Version: 1:1.10-12
Depends: libc6 (>= 2.2.4-4)
Description: support for getting/setting POSIX.1e capabilities
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.  Note that it will not provide any functionality with kernels
 below 2.2

Package: sysklogd
Status: install ok installed
Priority: important
Section: base
Installed-Size: 196
Maintainer: Martin Schulze <joey@debian.org>
Version: 1.4.1-10
Replaces: syslogd
Provides: syslogd, system-log-daemon
Depends: libc6 (>= 2.2.4-4), klogd | linux-kernel-log-daemon
Conflicts: syslogd
Conffiles:
 /etc/syslog.conf 3882195aa34cd97b8a57120bc8b47f3b
 /etc/init.d/sysklogd cfe9ee910fb41db683f298e7accd74fe
 /etc/cron.daily/sysklogd 05c1e431b98caa3f1277ad74fcf9185d
 /etc/cron.weekly/sysklogd 62066ad440b58a954e68132610b3c347
Description: System Logging Daemon
 This package implements the system log daemon, which is an enhanced
 version of the standard Berkeley utility program. It is responsible
 for providing logging of messages received from programs and facilities
 on the local host as well as from remote hosts.

Package: libgtk1.2-common
Status: purge ok not-installed
Priority: optional
Section: misc

Package: libgdbmg1
Status: purge ok not-installed
Priority: standard
Section: libs

Package: vlan
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 124
Maintainer: Ard van Breemen <ard@kwaak.net>
Version: 1.5-2
Depends: libc6 (>= 2.2.4-4), iproute
Conffiles:
 /etc/network/if-pre-up.d/vlan 7622c3b94861f140ba07ebc9329db3b7
 /etc/network/if-up.d/ip 7b392c757c59a3818a5a24fba839768f
 /etc/network/if-post-down.d/vlan b8b471891a12d4117ebde702009a0387
Description: User mode programs to enable VLANs on your ethernet devices
 This package contains the user mode programs you need to add and remove
 VLAN devices from your ethernet devices.
 .
 A typical application for a VLAN enabled box is a single wire firewall,
 router or load balancer.
 .
 You need a VLAN kernel for this. Kernel versions < 2.4.14 need to be
 patched. Currently the VLAN patch is only supported for 2.4 kernels.

Package: libpopt0
Status: install ok installed
Priority: important
Section: base
Installed-Size: 292
Maintainer: Paul Martin <pm@debian.org>
Source: popt
Version: 1.6.2-7
Replaces: popt
Depends: libc6 (>= 2.2.4-4)
Conflicts: popt, libpopt-dev (<= 1.4-1), rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.

Package: lm-sensors
Status: purge ok not-installed
Priority: extra
Section: utils

